6. Developer’s Guide

Note

ISC acknowledges that users and developers have different needs, so the user and developer documents should eventually be separated. However, since the project is still in its early stages, this section is kept in the Stork ARM for convenience.

6.1. Rakefile

Rakefile is a script for performing many development tasks, like building source code, running linters and unit tests, and running Stork services directly or in Docker containers.

There are several other Rake targets. For a complete list of available tasks, use rake -T. Also see the Stork wiki for detailed instructions.

6.2. Generating Documentation

To generate documentation, simply type rake build:doc. Sphinx and rtd-theme must be installed. The generated documentation will be available in the doc/_build directory.

6.3. Setting Up the Development Environment

The following steps install Stork and its dependencies natively, i.e., on the host machine, rather than using Docker images.

First, PostgreSQL must be installed. This is OS-specific, so please follow the instructions from the Installation chapter.

Once the database environment is set up, the next step is to build all the tools. The first command below downloads some missing dependencies and installs them in a local directory. This is done only once and is not needed for future rebuilds, although it is safe to rerun the command.

$ rake build:backend
$ rake build:ui

The environment should be ready to run. Open three consoles and run the following three commands, one in each console:

$ rake run:server

$ rake build:ui_live

$ rake run:agent

Once all three processes are running, connect to http://localhost:8080 via a web browser. See Using Stork for information on initial password creation or addition of new machines to the server.

The run:agent runs the agent directly on the current operating system, natively; the exposed port of the agent is 8888.

There are other Rake tasks for running preconfigured agents in Docker containers. They are exposed to the host on specific ports.

When these agents are added as machines in the Stork server UI, both a localhost address and a port specific to a given container must be specified. The list of containers can be found in the Docker Containers for Development section.

6.3.1. Installing Git Hooks

There is a simple git hook that inserts the issue number in the commit message automatically; to use it, go to the utils directory and run the git-hooks-install script. It copies the necessary file to the .git/hooks directory.

6.4. Agent API

The connection between stork-server and the agents is established using gRPC over http/2. The agent API definition is kept in the backend/api/agent.proto file. For debugging purposes, it is possible to connect to the agent using the grpcurl tool. For example, a list of currently provided gRPC calls may be retrieved with this command:

$ grpcurl -plaintext -proto backend/api/agent.proto localhost:8888 describe
agentapi.Agent is a service:
service Agent {
  rpc detectServices ( .agentapi.DetectServicesReq ) returns ( .agentapi.DetectServicesRsp );
  rpc getState ( .agentapi.GetStateReq ) returns ( .agentapi.GetStateRsp );
  rpc restartKea ( .agentapi.RestartKeaReq ) returns ( .agentapi.RestartKeaRsp );
}

Specific gRPC calls can also be made. For example, to get the machine state, use the following command:

$ grpcurl -plaintext -proto backend/api/agent.proto localhost:8888 agentapi.Agent.getState
{
  "agentVersion": "0.1.0",
  "hostname": "copernicus",
  "cpus": "8",
  "cpusLoad": "1.68 1.46 1.28",
  "memory": "16",
  "usedMemory": "59",
  "uptime": "2",
  "os": "darwin",
  "platform": "darwin",
  "platformFamily": "Standalone Workstation",
  "platformVersion": "10.14.6",
  "kernelVersion": "18.7.0",
  "kernelArch": "x86_64",
  "hostID": "c41337a1-0ec3-3896-a954-a1f85e849d53"
}

6.5. RESTful API

The primary user of the RESTful API is the Stork UI in a web browser. The definition of the RESTful API is located in the api folder and is described in Swagger 2.0 format.

The description in Swagger is split into multiple files. Two files comprise a tag group:

  • *-paths.yaml - defines URLs

  • *-defs.yaml - contains entity definitions

All these files are combined by the yamlinc tool into a single Swagger file, swagger.yaml, which then generates code for:

  • the UI fronted by swagger-codegen

  • the backend in Go lang by go-swagger

All these steps are accomplished by Rakefile.

6.6. Backend Unit Tests

There are unit tests for the Stork agent and server backends, written in Go. They can be run using Rake:

$ rake unittest:backend

This requires preparing a database in PostgreSQL.

One way to avoid doing this manually is by using a Docker container with PostgreSQL, which is automatically created when running the following Rake task:

$ rake unittest:backend_db

This task spawns a container with PostgreSQL in the background, which then runs unit tests. When the tests are completed, the database is shut down and removed.

6.6.1. Unit Tests Database

When a Docker container with a database is not used for unit tests, the PostgreSQL server must be started and the following role must be created:

postgres=# CREATE USER storktest WITH PASSWORD 'storktest';
CREATE ROLE
postgres=# ALTER ROLE storktest SUPERUSER;
ALTER ROLE

To point unit tests to a specific Stork database, set the DB_HOST environment variable, e.g.:

$ rake unittest:backend DB_HOST=host:port

By default it points to localhost:5432.

Similarly, if the database setup requires a password other than the default storktest, the DB_PASSWORD variable can be used by issuing the following command:

$ rake unittest:backend DB_PASSWORD=secret123

Note that there is no need to create the storktest database itself; it is created and destroyed by the Rakefile task.

6.6.2. Unit Tests Coverage

A coverage report is presented once the tests have executed. If coverage of any module is below a threshold of 35%, an error is raised.

6.6.3. Benchmarks

Benchmarks are part of backend unit tests. They are implemented using the golang “testing” library and they test performance-sensitive parts of the backend. Unlike unit tests, the benchmarks do not return pass/fail status. They measure average execution time of functions and print the results to the console.

In order to run unit tests with benchmarks, the BENCHMARK environment variable must be specified as follows:

$ rake unittest:backend BENCHMARK=true

This command runs all unit tests and all benchmarks. Running benchmarks without unit tests is possible using the combination of the BENCHMARK and TEST environment variables:

$ rake unittest:backend BENCHMARK=true TEST=Bench

Benchmarks are useful to test the performance of complex functions and find bottlenecks. When working on improving the performance of a function, examining a benchmark result before and after the changes is a good practice to ensure that the goals of the changes are achieved.

Similarly, adding new logic to a function often causes performance degradation, and careful examination of the benchmark result drop for that function may drive improved efficiency of the new code.

6.6.4. Short Testing Mode

It is possible to filter out long-running unit tests, by setting the SHORT variable to true on the command line:

$ rake unittest:backend SHORT=true

6.7. Web UI Unit Tests

Stork offers web UI tests, to take advantage of the unit tests generated automatically by Angular. The simplest way to run these tests is by using Rake tasks:

rake unittest:ui

The tests require the Chromium (on Linux) or Chrome (on Mac) browser. The rake unittest:ui task attempts to locate the browser binary and launch it automatically. If the browser binary is not found in the default location, the Rake task returns an error. It is possible to set the location manually by setting the CHROME_BIN environment variable; for example:

export CHROME_BIN=/usr/local/bin/chromium-browser
rake unittest:ui

By default, the tests launch the browser in headless mode, in which test results and any possible errors are printed in the console. However, in some situations it is useful to run the browser in non-headless mode because it provides debugging features in Chrome’s graphical interface. It also allows for selectively running the tests. Run the tests in non-headless mode using the DEBUG variable appended to the rake command:

rake unittest:ui DEBUG=true

That command causes a new browser window to open; the tests run there automatically.

The tests are run in random order by default, which can make it difficult to chase individual errors. To make debugging easier by always running the tests in the same order, click “Debug” in the new Chrome window, then click “Options” and unset the “run tests in random order” button. A specific test can be run by clicking on its name.

TEST=src/app/ha-status-panel/ha-status-panel.component.spec.ts rake unittest:ui

By default, all tests are executed. To run only a specific test file, set the “TEST” environment variable to a relative path to any .spec.ts file (relative to the project directory).

When adding a new component or service with ng generate component|service ..., the Angular framework adds a .spec.ts file with boilerplate code. In most cases, the first step in running those tests is to add the necessary Stork imports. If in doubt, refer to the commits on https://gitlab.isc.org/isc-projects/stork/-/merge_requests/97. There are many examples of ways to fix failing tests.

6.8. System Tests

Stork system tests interact with its REST API to ensure proper server behavior, error handling, and stable operation for malformed requests. Depending on the test case, the system testing framework can automatically set up and run Kea or Bind9 daemons and the Stork Agents the server will interact with during the test. It runs these daemons inside the Docker containers.

6.8.1. Dependencies

System tests require:

  • Linux or macOS operating system (Windows and BSD were not tested)

  • Python >= 3.18

  • Rake (as a launcher)

  • Docker

  • docker-compose >= 1.28

6.8.2. Initial steps

A user must be a member of the docker group to run the system tests. The following commands create create this group and add the current user to it on Linux.

  1. Create the docker group.

$ sudo groupadd docker

  1. Add your user to the docker group.

$ sudo usermod -aG docker $USER

  1. Log out and log back in so that your group membership is re-evaluated.

6.8.3. Running System Tests

After preparing all the dependencies, the tests can be started using the following command:

$ rake systemtest

This command first prepares all necessary toolkits (except these listed above) and configuration files. Next, it calls pytest, a Python testing framework used in Stork for executing the system tests.

Some test cases use the premium Kea hooks. They are disabled by default. To enable them, specify the valid CloudSmith access token in the CS_REPO_ACCESS_TOKEN variable.

$ rake systemtest CS_REPO_ACCESS_TOKEN=<access token>

Test results for individual test cases are shown at the end of the tests execution.

Warning

Users should not attempt to run the system tests by directly calling pytest because it would bypass the step to generate the necessary configuration files. This step is conducted by the rake tasks.

To run a particular test case, specify its name in the TEST variable:

$ rake systemtest TEST=test_users_management

To list available tests without actually running them, use the following command:

$ rake systemtest:list

To run the test cases with a specific Kea version, provide it in the KEA_VERSION variable:

$ rake systemtest KEA_VERSION=2.0
$ rake systemtest KEA_VERSION=2.0.2
$ rake systemtest KEA_VERSION=2.0.2-isc20220227221539

Accepted version format is: MAJOR.MINOR[.PATCH][-REVISION]. The version must contain at least major and minor components.

Similarly, to run test cases with a specific BIND9 version, provide it in the BIND9_VERSION variable:

$ rake systemtest BIND9_VERSION=9.16

Expected version format is: MAJOR.MINOR.

6.8.4. System Tests Framework Structure

The system tests framework is located in the tests/system directory that has the following structure:

  • config - the configuration files for specific docker-compose services

  • core - implements the system tests logic, docker-compose controller, wrappers for interacting with the services, and integration with pytest

  • openapi_client - an autogenerated client interacting with the Stork Server API

  • test-results - logs from the last tests execution

  • tests - the test cases (in the files prefixed with the test_)

  • conftest.py - defines hooks for pytest

  • docker-compose.yaml - the docker-compose services and networking

6.8.5. System Test Structure

Let’s consider the following test:

from core.wrappers import Server, Kea

def test_search_leases(kea_service: Kea, server_service: Server):
    server_service.log_in_as_admin()
    server_service.authorize_all_machines()

    data = server_service.list_leases('192.0.2.1')
    assert data['items'][0]['ipAddress'] == '192.0.2.1'

The system tests framework runs in the background and maintains the docker-compose services that contain different applications. It provides the wrappers to interact with them using a domain language. They are the high-level API and encapsulate the internals of the docker-compose and other applications. The following line:

from core.wrappers import Server, Kea

imports the typings for these wrappers. Importing them is not necessary to run the test case, but it enables the hints in IDE, which is very convenient during the test development.

The next line:

def test_search_leases(kea_service: Kea, server_service: Server):

defines the test function. It uses the arguments that are handled by the pytest fixtures. There are four fixtures:

  • kea_service - it starts the container with Kea daemon(s) and Stork Agent. If no fixture argument is specified (see later), it also runs the Stork Server containers and performs the Stork Agents registration. The default configuration is described by the agent-kea service in the docker-compose file.

  • server_service - it starts the container with Stork Server. The default configuration is described by the server service in the docker-compose file.

  • bind9_service - it starts the container with the Bind9 daemon and Stork Agent. If not fixture argument was used (see later), it runs also the Stork Server containers and Agent registers. The default configuration is described by the agent-kea service in the docker-compose file.

  • perfdhcp_service - it provides the container with the perfdhcp utility. The default configuration is described by the perfdhcp service in the docker-compose file.

If the fixture is required, the specified container is automatically built and run. The test case is executed only when the service is operational - it means it is started and healthy (i.e., the health check defined in the Docker image passes). The containers are stopped and removed, and the logs are fetched after the test.

Only one container of a given kind can run in the current version of the system tests framework.

server_service.log_in_as_admin()
server_service.authorize_all_machines()

Test developers should use the methods provided by the wrappers to interact with the services. Typical operations are already available as functions.

Use server_service.log_in_as_admin() to login as an administrator and start the session. Subsequent requests will contain the credentials in the cookie file.

The server_service.authorize_all_machines() fetches all unauthorized machines and authorizes them. They are returned by the function. The agent registration is performed during the fixture preparation.

Use the server_service.wait_for_next_machine_states() to block and wait until new machine states are fetched and returned.

The server wrapper provides functions to list, search, create, read, update, or delete the items via the REST API without a need to manually prepare the requests and parse the responses. For example:

data = server_service.list_leases('192.0.2.1')

To verify the data returned by the call above:

assert data['items'][0]['ipAddress'] == '192.0.2.1'

6.8.6. System Tests with a Custom Service

Test developers should not reconfigure the docker-compose service in a test case for the following reasons.

  • It is slow - stopping and re-running the service The test case should assume that the environment is configured.

  • It can be unstable - if a service fails to start or is not operational after restart; stopping one service may affect another service. Handling unexpected situations increases the test case duration and increases its complexity.

  • It is hard to write and maintain - it is often needed to use regular expressions to modify the content of the existing files, create new files dynamically, and execute the custom commands inside the container. It requires a lot of work, is complex to audit, and is hard to debug.

The definition of the test case environment should be placed in the docker-compose.yaml file. Use the environment variables, arguments, and volumes to configure the services. It allows for using static values and files that are easy to read and maintain.

Three general services should be sufficient for most test cases and can be extended in more complex scenarios.

  1. server-base - the standard Stork Server. It doesn’t use the TLS to

    connect to the database.

  2. agent-kea - it runs a container with the Stork Agent, Kea DHCPv4, and

    Kea DHCPv6 daemons. The agent connects to Kea over IPv4, does not use the TLS or the Basic Auth credentials. Kea is configured to provision 3 IPv4 and 2 IPv6 networks.

  3. agent-bind9 - it runs a container with the Stork Agent and Bind9 daemon.

The services can be customized using the extends keyword. The test case should inherit the service configuration and apply suitable modifications.

Note

Test cases should use absolute paths to define the volumes. The host paths should begin with $PWD environment variable returning the root project directory.

To run your test case with specific services, use the special helpers:

  1. server_parametrize

  2. kea_parametrize

  3. bind9_parametrize

They accept the name of the docker-compose service to use in the first argument:

from core.fixtures import kea_parametrize

@kea_parametrize("agent-kea-many-subnets")
def test_add_kea_with_many_subnets(server_service: Server, kea_service: Kea):
    pass

The Kea and Bind9 helpers additionally accept the suppress_registration parameter. If it is set to True the server service is not automatically started, and the Stork Agent does not try to register.

from core.fixtures import kea_parametrize

@kea_parametrize(suppress_registration=True)
def test_kea_only_fixture(kea_service: Kea):
    pass

Note

It is not supported to test Stork with different Kea or Bind9 versions. This feature is under construction.

6.8.7. Update Packages in System Tests

A specialized package_service docker-compose service is dedicated to performing system tests related to updating the packages. The service contains the Stork Server and Stork Agent (without any Kea or Bind daemons) installed from the CloudSmith packages (instead of the source code).

The installed version can be customized using an package_parametrize decorator. If not provided, then the latest version will be installed. Using many different Stork versions in the system tests may impact their execution time.

Additionally, the OpenAPI client is generated from the current Stork version and maybe be incompatible with the older ones. It is possible to use the no_validate context to suppress some compatibility errors.

with package_service.no_validate() as legacy_service:
    pass

6.8.8. Using perfdhcp to Generate Traffic

The agent-kea service includes an initialized lease database. It should be enough for most test cases. To generate some DHCP traffic, use the perfdhcp_service.

from core.wrappers import Kea, Perfdhcp

def test_get_kea_stats(kea_service: Kea, perfdhcp_service: Perfdhcp):
    perfdhcp_service.generate_ipv4_traffic(
        ip_address=kea_service.get_internal_ip_address("subnet_00", family=4),
        mac_prefix="00:00"
    )

    perfdhcp_service.generate_ipv6_traffic(
        interface="eth1"
    )

Please note above that an IPv4 address is used to send DHCPv4 traffic and an interface name for the DHCPv6 traffic. There is no easy way to recognize which Docker network is connected to which container interface. The system tests use the priority property to ensure that the networks are assigned to the consecutive interfaces.

networks:
  storknet:
    ipv4_address: 172.20.42.200
    priority: 1000
  subnet_00:
    ipv4_address: 172.100.42.200
    priority: 500

In the configuration above, the storknet network should be assigned to the eth0 (the first) interface, and the subnet_00 network to the eth1 interface. Our experiments show that this assumption works reliably.

6.8.9. Debugging System Tests

The system test debugging may be performed at different levels. You can debug the test execution itself or connect the debugger to an executable running in the Docker container.

The easiest approach is to attach the debugger to the running pytest process. It can be done using the standard pdb Python debugger without any custom configuration, as the debugger is running on the same machine as debugged binary. It allows you to break the test execution at any point and inject custom commands or preview the runtime variables.

Another possibility to use the Python debugger is by running the pytest executable directly by pdb. You need manually call the rake systemtest:build to generate all needed artifacts before running tests. It’s recommended to pass the -s and -k flags to pytest.

Even if the test execution is stopped on a breakpoint, the Docker containers are still running in the background. You can check their logs using rake systemtest:logs SERVICE=<service name> or run the console inside the container by rake systemtest:shell SERVICE=<service name> where the <service name> is a service name from the docker-compose.yaml file (e.g., agent-kea). To check the service status in the container console, type supervisorctl status. These tools should suffice to troubleshoot most problems with misconfigured Kea or Bind9 daemons.

It is possible to attach the local debugger to the executable running in the Docker container for more complex cases. This possibility is currently implemented only for the Stork Server. To use it, you must be sure that the codebase on a host is the same as on the container. In system tests, the server is started by the dlv Go debugger and listens on the 45678 host port. You can use the rake utils:connect_dbg command to attach the gdlv debugger. It is recommended to attach the Python debugger and stop the test execution first. Then, attach the Golang debugger to the server.

6.8.10. System Test Commands

The following commands run the system tests and help with troubleshooting:

Rake tasks for system testing

Rake Tasks

Description

rake systemtest

Runs the system tests. Use TEST variable to run a selected test.

rake systemtest:build

Build the system test containers.

rake systemtest:down

Stops all system test containers and removes them. It also removes all networks, and volumes.

rake systemtest:list

Lists the test cases.

rake systemtest:logs

Displays the container logs. Use the SERVICE variable to get the logs only for a specific service.

rake systemtest:perfdhcp

Low-level access to the perfdhcp command in a container. The Rake-style arguments can be specified to control perfdhcp, e.g.: rake systemtest:perfdhcp[-6,-l,eth1].

rake systemtest:sh

Low-level access to the docker-compose with all necessary parameters. Use Rake-style arguments, e.g. rake systemtest:sh[ps]

rake systemtest:shell

Attaches to a shell in a container with provided name by SERVICE variable.

rake gen:systemtest:swagger

Generates the system test OpenAPI client.

rake gen:systemtest:configs

Generates the configs used by system tests.

6.8.11. Running Tests Alpine Linux

Running system tests on Alpine Linux requires additional setup steps. Alpine uses libc-musl instead of libc, which causes issues with the npm dependency in Stork build scripts. Installing nodejs manually using the package manager solves this problem:

$ apk add --no-cache nodejs

and set the USE_SYSTEM_NODEJS environment variable to true:

$ rake demo:up USE_SYSTEM_NODEJS=true

6.9. Docker Containers for Development

To ease development, there are several Docker containers available. These containers are used in the Stork demo and are fully described in the Demo chapter.

The following Rake tasks start these containers.

Rake tasks for managing development containers

Rake Task

Description

rake demo:up:kea

Build and run an agent-kea container with a Stork agent and Kea with DHCPv4. Published port is 8888.

rake demo:up:kea6

Build and run an agent-kea6 container with a Stork agent and Kea with DHCPv6. Published port is 8886.

rake demo:up:kea_ha

Build and run two containers, agent-kea-ha1 and agent-kea-ha2 that are configured to work together in High Availability mode, with Stork agents, and Kea DHCPv4.

rake demo:up:kea_premium

Build and run the agent-kea-premium-one and agent-kea-premium-two containers with Stork agents and Kea DHCPv4 and DHCPv6 servers, with host reservations stored in a database. It requires premium features.

rake demo:up:bind9

Build and run an agent-bind9 container with a Stork agent and BIND 9. Published port is 9999.

rake demo:up:postgres

Build and run a Postgres container.

rake demo:up

Build and run all above containers

rake demo:down

Stop and remove all containers and all referenced volumes and networks

Note

It is recommended that these commands be run using a user account without superuser privileges, which may require some previous steps to set up. On most systems, adding the account to the docker group should be enough. On most Linux systems, this is done with:

$ sudo usermod -aG docker ${user}

A restart may be required for the change to take effect.

The Kea and BIND 9 containers connect to the Stork Server container by default. It can be useful for developers to connect them to the locally running server. You can specify the target server using the SERVER_MODE environment variable with one of the values:

  • host - Do not run the server in Docker. Use the local one instead (it must be run separately on the host).

  • no-server - Do not run the server.

  • with-ui - Run the server in Docker with UI.

  • without-ui - Run the server in Docker without UI.

  • default - Use the default service configuration from the Docker compose file (default).

For example, to connect the agent from the Docker container to the locally running Stork Server:

  1. Run the Stork Server locally:

$ rake run:server

  1. Run a specific agent service with the SERVER_MODE parameter set to host:

$ rake demo:up:kea SERVER_MODE=host

  1. Check the unauthorized machines page for a new machine

The Stork Agent containers use the Docker hostnames during communication with Stork Server. If you use the server running locally, located on the Docker host, it cannot resolve the Docker hostnames. You need to explicitly provide the hostname mapping in your /etc/hosts file to fix it. You can use the rake demo:check_etchosts command to check your actual /etc/hosts and generate the content that needs to be appended. This task will automatically run if you use SERVER_MODE=host then you don’t need to call it manually. It’s mainly for diagnostic purposes.

6.10. Packaging

There are scripts for packaging the binary form of Stork. There are two supported formats: RPM and deb.

The package type is selected based on the OS that executes the command. Use the utils:print_pkg_type to get the package type supported by your OS.

Use rake build:agent_pkg to build the agent package and rake build:server_pkg for server package. The package binaries are located in the dist/pkgs directory.

Stork build system attempts to detect native package format. If multiple tools are present, e.g., deb and rpm tools on a Debian-based system, a specific packaging format can be enforced using the PKG_TYPE variable. The available package types will be prompted on a console.

Internally, these packages are built by FPM. It is installed automatically, but it requires the ruby-dev, gnutar, and make to build.

6.11. Storybook

Stork build system has integrated Storybook for development purposes.

“Storybook is a tool for UI development. It makes development faster and easier by isolating components. This allows you to work on one component at a time. You can develop entire UIs without needing to start up a complex dev stack, force certain data into your database, or navigate around your application.”

—Storybook documentation

To run Storybook, type:

$ rake storybook

and wait for opening a web browser.

6.11.1. Writing a Story

To create a new story for a component, create a new file with the .stories.ts extension in the component’s directory. It must begin with the story metadata:

export default {
    title: 'App/JSON-Tree',
    component: JsonTreeComponent,
    decorators: [
        moduleMetadata({
            imports: [PaginatorModule],
            declarations: [JsonTreeComponent],
        }),
    ],
    argTypes: {
        value: { control: 'object' },
        customValueTemplates: { defaultValue: {} },
        secretKeys: { control: 'object', defaultValue: ['password', 'secret'] },
    },
} as Meta

It specifies a title and the main component of the story. The declaration of the moduleMetadata decorator is the key part of the file. It contains all related modules, components, and services. It should have similar content to the dictionary passed to the TestBed.configureTestingModule in a .spec.ts file. The imports list should contain all used PrimeNG modules (including these from the sub-components) and Angular modules. Unlike in unit tests, you can use the standard Angular modules instead of the testing modules. Especially:

  • HttpClientModule instead of HttpClientTestingModule to work with the HTTP mocks.

  • BrowserAnimationsModule instead of NoopAnimationsModule to enable animations.

The declarations list should contain all Stork-owned components used in the story. The providers list should contain all needed services.

Note

There are different ways to mock the services communicating over the REST API, but the easiest and most convenient is simply to mock the actual HTTP calls.

If your component accepts the arguments, specify them using the argTypes. It allows you to change their values from the Storybook UI.

Warning

Storybook can discover the component’s properties automatically but this feature is currently disabled due to the bug in Storybook for Angular.

Next, create the template object instance by passing the component type as generic type:

const Template: Story<JsonTreeComponent> = (args: JsonTreeComponent) => ({
    props: args,
})

Finally, bind the template object and provide its arguments:

export const Basic = Template.bind({})

Basic.args = {
    key: 'key',
    value: {
        foo: 42
    }
}

6.11.2. HTTP Mocks

The easiest way to mock the REST API is using the storybook-addon-mock First, you need to import it:

import mockAddon from 'storybook-addon-mock'

and append to the decorators list in the story metadata:

export default {
    title: ...,
    component: ...,
    decorators: [
        moduleMetadata({
            ...
        }),
        mockAddon
    ],
    argTypes: ...,
    parameters: {
        mockData: [
            ...
        ],
    },
} as Meta

The mocked API responses are specified by the parameters.mockData list that is a property of the metadata object.

Note

Remember to use HttpClientModule instead of HttpTestingClientModule in the imports list of the moduleMetadata decorator.

6.11.3. Toast messages

The Stork components often use MessageService to present temporary messages to the user. The messages are passed into a dedicated, top-level component responsible for displaying them as temporary rectangles (so-called toasts) in the upper right corner. Due to this, the top-level component is associated with no particular component and does not exist in the isolated Storybook environment. As a result, the toasts are not presented.

To workaround this problem, the toastDecorator can be used. It injects additional HTML while rendering the Story. The extra code contains the top-level component to handle toasts and ensures they are correctly displayed.

First, you need to import the decorator:

import { toastDecorator } from '../utils.stories'

and append it to the decorators property of the metadata object:

export default {
    title: ...,
    component: ...,
    decorators: [
        moduleMetadata({
            ...
        }),
        toastDecorator
    ],
    argTypes: ...
} as Meta

Remember to add the MessageService to the providers list of the moduleMetadata decorator.

6.12. Implementation details

6.12.1. Agent Registration Process

The diagram below shows a flowchart of the agent registration process in Stork. It merely demonstrates the successful registration path. The first Certificate Signing Request (CSR) is generated using an existing or new private key and agent token. The CSR, server token (optional), and agent token are sent to the Stork server. A successful server response contains a signed agent certificate, a server CA certificate, and an assigned Machine ID. If the agent was already registered with the provided agent token, only the assigned machine ID is returned without new certificates. The agent uses the returned machine ID to verify that the registration was successful.

_images/registration-agent.svg

Agent registration